|
|
|
|
|
|
|
|
|
|
Four Jaw Pressure Centralizing Equalizing Ball-Grip Power Chuck
|
Sealed
Design |
Jaw Travel |
Differential
Chuckings |
|
Eliminates
costly maintenance and down time, increasing machine time,
productivity and profits. |
Increased Jaw
travel enhances part loading and tolerance variations. |
Chuck allows for High-Low pressure chucking. |
|
|
|
|
|
Ball Joint
Construction |
Pullback
Action |
Customer
Assistance |
|
Power
mechanism operates within a sealed unit of high pressure lubricant |
Stabilizes
part against work stop providing positive location and control of
critical machining dimensions. |
Ultra-Grip's
trained personnel provide immediate on-site customer service. |
|
|
|
|
|
High Power
Ratio |
Jaw Swivel |
QC Jaw
Mountings |
|
Higher
gripping force with less input resulting in longer chuck life |
Compensates
for part variation insuring 2 point jaw contact |
Optional
Quick Change Jaw Mounting available for rapidly changing work
piece tooling and eliminating screw removal. |
|
|
| CHUCK SIZE | 10" | 23" |
|
(4) JAW CENTRALIZING EQUALIZING CHUCK ASSEMBLY |
UBG 10004 |
UBG 23004 |
| DIMENSION A | 10.50 | 23.00 |
| DIMENSION B | 1.50 | 3.00 |
| DIMENSION C | 4.23 | 5.61 |
| DIMENSION D | 1.00 | 1.50 |
| DIMENSION E | 2.30 | 2.94 |
| DIMENSION F | 6.59 | 8.76 |
| DIMENSION G | 2.68 | 7.75 |
| DIMENSION H | 5/8 | 1.00 |
| MAX. DRAWBAR INCH. LBS. OF FORCE | 6,500 | 16,000 |
| TOTAL DRAWBAR TRAVEL MINIMUM | .79 | .90 |
| TOTAL JAW TRAVEL AT POINT -A- (DIAMETRIC TRAVEL) | .540 | .620 |
NOTE #1 MINIMUM CHUCK HEIGHT TO BE DETERMINED UPON RECEIPT OF MACHINE SPINDLE INFORMATION
SHOWN ABOVE IS AN EXTERNAL GRIP, COMPENSATING EQUALIZING CHUCK.
MOST CHUCK SIZES ARE AVAILABLE AS STANDARD, IN EXTERNAL, INTERNAL, CENTRALIZING EQUALIZING
Copyright ©
2003 by Ultra-Grip International. All rights reserved.
For sales information write sales@ultra-grip.com
Got Questions? Send email to webmaster@ultra-grip.com
